Home Improvement Resources

When Is The Best Time To Consider Furnace Replacement?

As a homeowner, it can be difficult deciding on whether you should schedule yet another repair for your home’s moody furnace, or finally concede and start looking at the latest and greatest models on the market.

So, when is the best time to start considering furnace replacement?

There really is no simple answer to this question, but there are certain factors that are common in any situation.

Here’s what you should know about how to tell when is the best time to replace a furnace.

Planned vs Unplanned

Instead of asking when is the best time to replace, perhaps the question should be; which is better — a planned or unplanned replacement?

Imagine the reduced stress and discomfort for you and your family when you choose a planned furnace replacement.

No longer will you have to worry about your aging furnace all day, and wonder when the day will come when you return home to a freezing house and a furnace that refuses to work— especially in the middle of winter!

furnace installation contractor holding clipboard

Warning Signs of Furnace Replacement

There are a number of tell-tale signs that your furnace will start to exhibit as your heating system begins nearing the end of its lifespan.

Of course, you wouldn’t want to incur such an expense of replacing your furnace if it’s not called for—so your timing is really everything.

Here are some of the most common signs you can look for to help you know when is the best time to replace a furnace.

1. Advanced Age

If your system has had proper maintenance and care over the years, your system should last anywhere from 12-15 years. If maintenance has been poor, or absent altogether, the lifespan could be significantly reduced. If your system is in its later years, it may be time to consider furnace replacement.

2. Unexplained Spike in Heating Costs

Regardless of the type of fuel you use for heating, loss of system efficiency can significantly increase your utility costs. Other extenuating factors can also include a drafty home and colder-than-usual seasons, so it’s important to look for other correlating warning signs.

3. Yellow or Flickering Flame

A furnace flame is supposed to burn a bright blue color. If your flame has a yellowed hue or tint or seems to continuously flicker, this could be a sign of bigger troubles ahead. A problematic flame could indicate a number of things including the incomplete burning of fuel or clogged burner valve.

This issue could also indicate your system is generating more carbon monoxide than normal and could be leaking into your home.

home furnace

4. Unusual Sounds & Strange Noises

In general, your furnace should operate without strange or abnormal sounds. If you hear rattles, bangs, squeaks, pops, or hissing— it may be time to consult with a professional to determine if furnace replacement is right for you and your home.

5. Constant System Cycling

Most furnaces are designed to maintain temperatures by cycling on and off periodically. If your system seems to be struggling to stay on or is constantly cycling on and off—furnace replacement could be necessary.

6 Frequent Calls for Repairs

Generally speaking, your furnace should perform reliably and consistently without needing frequent repairs. A well-maintained system should only need a minor repair every couple of years or so. If you’re frequently calling for repairs, perhaps furnace replacement is a more financially sound option.

The Best Time to Replace Your Furnace

Here’s the bottom line: The best time to replace a furnace is before you experience a catastrophic and seriously inconvenient, uncomfortable breakdown.

Professional services and preventative maintenance can help you lengthen the lifespan of your system as your technician keeps a diligent and watchful eye for any furnace replacement warning signs.

 

How Long Will My Furnace Last?

Perhaps you’re buying a new furnace or just noticed that the one you bought two or three years ago has stopped putting out heat. So, you’re wondering how much longer the furnace will last before you’re required to buy a replacement.

First off, there is no need for panic.

Although the most recent generation of furnaces is a lot more fragile compared to the ones of the 50s and earlier, any typical furnace will still last many years.

cold indoorsWhat’s more, if a relatively new furnace is damaged or stops giving out heat, it can be repaired or replaced by the manufacturer as long as the warranty period has not lapsed. And, even after the warranty period passes, you can still call in an HVAC professional to diagnose and fix the appliance.

That said, however, furnaces eventually wear out and at some point need to be replaced. There are two main factors that influence how soon you’ll be replacing the appliance:

Law of Averages

A furnace is designed to last a predetermined number of years when operated under optimal conditions. This average life expectancy typically lies between 10-30 years.

If you’ve used yours for 20 years, for instance, you might start to notice frequent breakdowns and should expect that the appliance could be nearing its end.

Just like our bones become weaker with age, the electrical, heating, and ventilation components of a furnace wear with age. By 20 years, some of the components might become so weak that they need repairs every few weeks. At that point, it might make more sense to just replace the appliance.

However, this doesn’t mean that you should buy a new furnace as soon as the old one hits 20 or 30 years. Simply be prepared. Some furnaces last well over 40 years…and some even 50!

Although some appliances may deteriorate quickly once they get past the 10th year.

furnace installation contractor

Old vs New Generation Furnaces

The longevity of your furnace also depends on the type you use – specifically when it was built.

Older furnaces were built primarily for warming the house, with little regard given to efficiency. As long as the appliance was giving out enough heat to warm all the rooms, it was good enough.

Then, in the 70s, the government introduced regulations demanding that manufacturers prioritize efficiency. Consumers, becoming increasingly environmentally conscious, also began shifting to more energy efficient furnaces. This led to a range of design changes in the furnace, chief among them the thinning of the furnace walls that pushed efficiency from around 50 to 70%.

furnace flameThe same thinking, however, also made the furnace a lot weaker. Couple that with the introduction of multiple efficiency-boosting components such as fans and you have furnaces that are very prone to breakdowns.

In short, if yours is a new-generation furnace, don’t expect it to last as long as the older-generation furnaces. Most manufacturers actually say that their high-efficiency new-generation furnaces last between 12 and 15 years.

Good news – it’s easy to extend the life of your furnace!

You can stretch the life of your furnace beyond those 12 or 20 years with regular maintenance.

At least once a year, preferably before the onset of the cold season, bring in an HVAC pro to thoroughly inspect the appliance.

Among other things, the technician should test and service the electronics, ignition, heating, heat distribution, and venting components. Your furnace will last way longer!

 

Save on household finances with wood burning stoves

Surely wood burning must be bad for the environment?

No. Because if you go back further to when the tree was a seed then the resulting sapling gradually captured CO2 from the atmosphere as it grew into a tree. In other words, when a tree grows, CO2 is drawn from the atmosphere and when it rots or is burned then the same amount of CO2 is released. This carbon cycle is repeated as new trees grow and then die.

Modern Wood Burning Stove

The important thing to remember is that if you grow trees to make fuel then new trees should be planted as you burn the older ones so that the whole cycle continues and the net amount of carbon dioxide in the atmosphere remains fixed.

If you grow more trees than you burn then this reduces the amount of carbon dioxide in the atmosphere. This is why the energy from burning wood is known as Renewable Energy.

Unfortunately, planting loads more trees is not a complete solution to global warming. On its own, planting new trees won’t capture enough carbon to solve the whole Global Warming problem.

So where does the heat energy come from which is contained in the wood?

It comes from sunlight. Light from the sun enables photosynthesis to take place. This process absorbs carbon dioxide from the atmosphere and the carbon becomes part of the tree (wood). The sun’s energy is trapped in the wood until it is burnt when the energy is released.

Why not burn wood on an open fire?

An open fire is OK if you just want an occasional cosy blaze but there are a number of disadvantages:

  1. Open fires are very inefficient and most of the heat goes up the chimney. Open fires are typically only around 20% efficient.
  2. A woodburning stove recirculates combustion products and is designed to burn at a much higher temperature. This means gases present in the smoke are fully burned. This results in a thermal efficiency of around 80%. In other words you can get around 4 times as much heat from a log burnt on a modern wood stove than from an open fire.
  3. Wood stoves don’t need to be relit like an open fire. You can close them up when you don’t need them and as soon as you open the air vents and let the oxygen in the fire comes to life again.
  4. Wood burning stoves are less smoky than an ordinary open fire and produce less ash.
  5. Wood burners are safer because the fire is enclosed so you don’t get the danger of stray sparks or hot coals on the carpet.

How much does wood cost?

Roughly a third the cost of natural gas, electricity or oil. In practice you can collect Free Wood (to find out more click here) either from the ground in woodland or in the form of scrap timber. Wood is therefore very cost-effective and saves money.

If you want some tips about lighting a wood burning stove then click here or if you always forget your online banking details and need to access your online banking information guide with a reputable site then click here.

If you aren’t convinced about the benefits of a purchasing a woodburning stove then here are 10 reasons to think again.

Ten Good Reasons to Burn Wood

  1. Wood burning is free, or if you pay for it, much cheaper and more cost-effective than other fuels.
  2. Wood is a renewable energy resource.
  3. Burning wood doesn’t contribute to global warming.
  4. Gives independence from big energy suppliers and the impact of industrial and labor disputes.
  5. Wood burning is fun.
  6. Collecting and cutting timber is good exercise.
  7. Wood burning is romantic. Why not make love in front of a woodburning stove? But if you choose to go naked in front of an open fire then beware of stray sparks or flying coals!
  8. Space heating saves money. Heat the space you are in and leave the rest of the house relatively cool. You can always use your central heating to provide background heat elsewhere.
  9. Wood burning makes a great energy backup in troubled times. If your electricity and gas supplies are cut then you still have a way of heating your home and even heating a kettle or making toast.
  10. There is nothing like a real fire in the middle of winter. Nothing can beat real flames and losing yourself staring into the blazing heart of a wood fire.
The Romance of a Real Wood Fire

Switch to Wood Heating Today!

Times are hard so why not buy yourself a wood burning stove? Then get yourself a chain saw and start cutting wood.

Don’t rely on natural gas, scarce oil supplies or electricity but guarantee you and your loved ones a cosy home with a newly installed wood burner. And if you have cats and dogs they’ll love you and your fire for ever!

http://hubpages.com/living/Ten-Reasons-to-Burn-Wood

A Plumber’s Guide To Hot Water heaters

What is the Best Water Heater

With only a little research on the web, you will quickly understand that all brands of Water Heaters have numerous awful surveys. What’s a mortgage holder to do? Today’s commercial center has a boundless number of decisions and at first it can appear a bit of overwhelming. What’s more if your radiator has recently broken you may be more vulnerable to race into a buy that you may lament later on.
Rheem, Bradford White, and AO Smith are the enormous 3 makers of Water Heaters in the U.S. what’s more, make the greater part of the store brands. GE water warmers are made by Rheem, AO Smith makes the Sears radiators. Water warmers originate from the processing plant with different names on them yet are the same. Consequently I recommend you look for cost since about the main distinction is the length of the guarantee.

The audit locales and pipes discussions general rate that Bradford White as the best for fabricate quality and simplicity of repair. Obviously most pipes organizations advance this brand, so that might be the reason the white comes in first in evaluations. In actuality, the main way you can get a white is to buy through a pipes organization or a pipes supply store. You will never observe them in the huge box stores. You will likewise pay about a $100 additional for this brand.
Rheem, which additionally makes water warmers under the GE, Marathon and Richmond brands, comes in second. The GE water warmers made by Rheem is likely the most bought water radiator in the US as home stop bargains in this brand, so you can by and large get it less expensive. This is the water warmer I at present suggest the most. There are a greater amount of them out there so you will discover numerous awful surveys on them basically thus.
One of the biggest producers, A.O. Smith, makes water radiators under its own image name, and also Kenmore, Whirlpool and a couple of other water-warmer brands. In any case, A.O. Smith water radiators rank well beneath normal in the survey locales and pipes discussions, and proprietors auditing Kenmore and Whirlpool water warmers concur. This is the brand that I get the majority of the issue approaches and I generally prescribe to avoid these lemons.
All water warmers convey a one year guarantee on everything with the exception of the tank, so regardless of to what extent of a guarantee you buy, it may be the tank that conveys the maintenance agreement. Try not to purchase the service contract, try and find boiler quotes from reputable companies online, it is pointless as the significant segments will just convey a one year guarantee, regardless of the length of the maintenance agreement. Shop around its worth it. Water radiator guarantees are a tricky, so dependably purchase the least expensive and you will get an indistinguishable thing from the more drawn out guarantee.
A Water Heater Maintenance Plan
Flush A Water Heater Once A Year
A Water radiator tank can withstand the leftovers of time on the off chance that you avoid potential risk to shield it from the interior concoction responses from dregs development which causes the liner mass of the tank to consume. This outcomes in a Leaking boiling point water tank and requires supplanting your water radiator.
Yet, don’t give this a chance to transpire. You just need to flush your water warmer once per year to inspire it to a years ago more. A substantially more better technique would be than introduce a water conditioner. It makes the water friendlier to your water framework and the sifting of the garbage before it gets to your water warmer or anyplace else, and the solace of utilizing delicate water for washing or giving is far better than hard water.
To deplete a water radiator, you will require a standard home and garden water hose. Associate this water hose to the deplete fixture situated at the base of the water warmer, marginally right of the control valve. It looks simply like a general hose fixture and is made of plastic or metal. You can run the water hose out to the control on the off chance that it is hot or to your garden if icy. Kill the supply valve at the upper right of the radiator.
Next, turn on the heated water fixture at the kitchen sink to permit air to enter the boiling point water tank while it is depleting. Presently you are prepared to turn on the deplete nozzle and begin depleting water. After the water has depleted from the water warmer, open the supply valve to the water radiator and permit a flush out of the warmer. This flushes the garbage that was drifting on the water in the tank. Yes a portion of the trash is coasting and different flotsam and jetsam gathers on the base.
Turn the water heating appliance deplete fixture off. Alright we are prepared to refill the tank. Ensure the high temp water kitchen fixture is still in the on position and expel the screen from the spigot. Turn the boiling point water tank supply valve on and fill tank. At the point when the tank is full, water will leave the kitchen spigot and the tank is full. Supplant the kitchen spigot screen.
Tankless Hot Water Heaters also should be flushed once every year to counteract flotsam and jetsam develop. The numerous little water tubes going through the warmth exchanger of an on request water radiator will get stopped if not cleaned and will require costly repairs. It is best to have a water conditioner in conjunction with the tankless water warmer, which will permit your radiator to most recent 20 years. Flushing valves ought to have been introduced when initially introduced.
On Demand Tankless Hot Water Heater-All The Hot Water You Want
Our new age innovation has presented to us a superior water radiator. They now give as much high temp water as we need, however just utilize vitality when the boiling hot water is turned on. They don’t have a tank to hold and persistently warm the water. This, obviously, spares you cash on gas and water bills since it is not going now and again 24 hours a day.
Tankless high temp water heaters do the their employment just when you turn on the boiling hot water spigot. When you turn it on, chilly water goes into the radiator and is right away warmed and afterward exchanged to your installation. They keep running on either gas or power and is the most recent water heating appliance innovation right now.
Similarly as with anything so new as on request boiling point water seems to be, there are a few restrictions. Tankless radiators can just handle such a great amount of volume of water. On the off chance that to numerous apparatuses at utilized in the meantime, you may have issues relying upon the framework, the vast majority of these warmers will warm somewhere around two and five gallons a moment.
Tankless boiling hot water heaters cost more to purchase and cost a great deal more to introduce than normal high temp water radiators. The cost is more than balance, nonetheless, when you consider that you will spare 30 to 50 percent on your water warming expenses. Since these frameworks keep going for a long time, use trusted plumbing contractors as you ought to more than earn back the original investment on the buy and establishment costs.
Another additional cost of hiring a plumber on request boiling hot water frameworks is the water conditioner that you ought to have introduced inline to the warmer due to the numerous little water tubes going through the warmth exchanger that makes the warmth of the water. These little tubes can get stopped up because of the hard water components in your water supply.
Moment Hot Water At Every Shower Head And Faucet By Recirculating
In spite of the fact that a tankless on request water warmer will give you boundless boiling hot water ceaselessly, you will in any case need to run the water for quite a while, while sitting tight for the high temp water to get to your area. While you are holding up, 2-3 gallons will rundown the deplete. This water is altogether squandered and can without much of a stretch signify a huge number of gallons every year. What about whatever is left of your group? A great many gallons of water are lost.
In a run of the mill home, water goes from the water radiator through the channels to the spigot or shower head. Be that as it may, once it is stopped, the water in the channels begin to cool. Whenever you start up the boiling hot water, you need to hold up once more. One approach to counterbalance this is by protecting the funnels under your home, however it just makes the warmth stockpiling more productive yet not dispensing with it.
The answer for the issue is a recirculation system that takes the water from the further away point on the boiling hot water framework guiding it into the icy water line by utilization of a clock or a warmth detecting instrument to permit the water to remain hot at the purpose of utilization installation, in this way permitting you to have high temp water in a flash without the standard hold up time.
Boiling point water recirculation is troublesome in some old existing homes, particularly homes based on solid pieces and homes with cellars which have completed dividers and roof. However, now, there is an answer. There are currently programmed distribution valves available that will mount under your toilet sink that permit you to appreciate moment boiling point water at each apparatus with no loss of dilute the deplete.
Purchasing a New Hot Water Heater
Unexpectedly, your hot water heaters goes ruined. The main thing you will most likely do is call your handyman and timetable a visit. The handyman turns out and says yes, your water radiator needs supplanting and yes he has one in stock and can introduce it the principal thing in the morning and appraisals it will cost $1400. He turns out the following morning and introduces the water warmer in around 2 hours and the last bill is 1600 dollars.
You ought to have checked around at costs, however you had no high temp water and was worried to make them go again and didn’t consider checking at costs. after all everybody most likely charges basically the same, you thought. so you checked around and found that you can get another 30 gallon water radiator anywhere in the range of $300 to $500 dollars. Shit!!!! what was whatever remains of the cash for?
Obviously, a portion of the cash was for work, yet 1,000 dollars for two hours, that beyond any doubt isn’t reasonable. Most regions require an assessment when another heated water storage is introduced, yet most pipes organizations sidestep this progression and simply don’t do it. On the off chance that they do get an allow, it is as a rule around two hundred dollars. It will likewise require a moment visit by the handyman to meet a construction regulation overseer at your living arrangement.
Pick the Right Hot Tub With The Proper Water Heater
The principal thing to consider when purchasing a hot tub is hot water heater . You will require no less than a 50 gallon unit and bigger for a house brimming with individuals. I suggest a 75 lady water radiator for the best results for an extremely pleasant involvement in your new hot tub.

 

Article sourced by : http://hubpages.com/living/a-plumbers-guide-to-hot-water-heaters

Valves and Faucets – Ask An Expert

Introduction:

jaclo-supply-valve-handle-standard-crossBecause Expert boiler replacement services frequently receive questions pertaining to repair or replacement of valves and faucets commonly found in residential applications, this article has been prepared, as a reference, to provide basic information about several of those devices.

We hope the do-it-yourself homeowner may find this information useful in determining the nature and extent of some of the problems frequently found in their
plumbing and hot water heating systems, as well as helpful when attempting to repair or replace such devices.
Because there are many types of valves and faucets, it is beyond the scope of the article to provide exhaustive descriptions of the materials
and configurations found in every available type.

Water Supplies:
Almost all domestic, potable water supplies are from a distribution
system owned, operated and serviced by a Public Utility, usually a City
or County or tradesmen for insulation jobs like these. In some rural, or remote, areas the water supply may be from
a “drilled”, deep well or a shallow “dug” well.
Occasionally, a source of “spring water” is used. City and County water
supplies may be from rivers, lakes, reservoirs or deep wells. Such
sources usually contain, among other things, air and a variety of
minerals. Where deep wells are the source, sulfur may also be present.
Sulfur is frequently found in domestic well water, but most well water
supplies contain little, or no, air.
Air in domestic water supplies is both “beneficial” and an “annoyance”.

FaucetscutoutAirless water, such as “distilled water” has an unpleasant taste. For
this reason, Utilities with well water sources often incorporate a
feature, in or near the holding reservoir, at the treatment plant,
called an “aerator”. The device resembles a large fountain that forces
the water into the air, where it dissolves some of the air, and falls
back into the reservoir. Small, rural, well water supplies rarely
incorporate “aerator” devices and the water retains its unpleasant
taste, sometimes amplified by the presence of sulfur.

In the past, many municipalities, enjoyed domestic water sources
relatively free from most contaminants such as calcium and silicates.
Users of those water supplies enjoyed relatively trouble free service
from their valves and faucets, unless they abused them by
over-tightening or other physical damage. That advantage has either
become extinct, or is rapidly disappearing because the EPA
(Environmental Protection Agency), in its infinite wisdom, now requires
suppliers of domestic water that is inherently free of minerals to be
mixed with other supply sources that contain such minerals. The excuse
for this ruling is that, because pure mineral free water is an effective
solvent, it MAY dissolve lead from a lead supply pipe to the residence
(some still do exist) or from the solder in copper pipe system,
installed before lead bearing solder was banned. The latter seems most
unlikely.
Corrosion, or coating of valve and faucet parts, due to the presence of
minerals in water supplies, is a major source of deterioration and
malfunction of those devices. Water that is high in mineral content is
known as “hard water.” The effectiveness of soap is greatly impaired by
“hard Water”, but detergents are affected to a lesser degree. The result
of all this is a thriving “water softener” business in nearly every part
of the United States, more costs and more maintenance problems to plague the home owner.

For more professional boiler brands or home heating and energy services visit us at boiler quotes.

Master Plumbers and Radiant Heat Techs

Online and Waiting to Help!

Welcome to Online Plumbing-Heating

heatingWithin this website, you’ll find top of the line plumbing/heating tubing, pumps and radiant heat systems for melting snow, plus, project support.

These are the products that make do-it-yourself projects, no matter what size, easy and trouble free. Now, they are conveniently available to EVERYONE! Our available project support network and computerized heat losses make getting answers to your questions fast and reliable.

Heating:

Air Eliminators,AQUAPEX Non-Barrier Tube,Auto Feed,Copper Manifold,Backflow Preventer,Brass 3,Way Mixing Valves,Brass 4 Way Mixing Valve,Control Motor (series 62M) for ECL 9304 Outdoor Reset Control,Copper 1″ Manifolds with 3/4″ Copper Outlets,Copper Manifold Accessories,Copper Manifold Headers,Drop Ear Bend Supports,Backflow Preventer,Brass 3 Way Mixing Valves,Brass 4 Way Mixing Valve,Control Motor (series 62M) for ECL 9304 Outdoor Reset Control,Copper 1″ Manifolds with 3/4″ Copper Outlets,Copper Manifold Accessories,Copper Manifold Headers,Drop Ear Bend Supports,Electrical Components,Electronic RFH Control,Embassy Baseboard,EVERLOC Compression Sleeve Fittings,Fasteners,Grundfos Pumps,Heat Emission Plates,Hrydronic Heater,Kits,Manifold Actuator,Manifold Parts,Manifolds,Metal Bend Supports,Plastic Bend Supports,Plastic Protection Sleeve Tube,Pneumatic Tubing Stapler,ProPEX Adapter (PEX to Copper Fittings),ProPEX Copper Manifolds with 1/2″ Outlets,ProPEX Coupling (PEX to PEX),ProPex Male NPT (PEX to Male NPT),ProPEX Swivel Faucet Adaptor,QS20 Adapters

 How-to Pages 
 Piping Diagrams
 Odd Fittings / Tools
 Troubleshoot Leaks and Noises
 Sales and Direct Shipment
Save $$$$
Do-it-yourself:
 Let Online 
Heating-Plumbing
show you how!
Radiant Floor Heating
Radiant Floor Heating
Parts For All Your Plumbing Projects!

Thank you for choosing Online Plumbing-Heating!

Live Support is now available 24-hours!


Home | Catalog | Support | Order | Contact
 
Hydronics, Inc. / heating-plumbing.com
Toll-free: 888-456-2068
509-456-2566
fax: 509-744-0407

Copyright © 2016 Heating-Plumbing.com

Radiant Heating Systems

Radiant heating system: A Comprehensive Overview

To make your home more warm and comfortable during the harsh winter months make use of radiant heating system! This modern day invention makes those wet and icy winter days spent at home/office much more enjoyable and manageable with its unique heating mechanism that provides you with luxurious warmth and comfort.

Radiant heating system is a unique and efficient system of heating a room/space either by generating heat through electricity circulating in electrical cables (Electric radiant heating) installed inside tubes embedded in the floor or under the floors or by heating the floor panels with circulating hot water/oil within tubes or pipes inside or under the floor (Hydronic radiant heating).

One of the most positive aspects about these radiant heating systems is that they are highly energy efficient heating devices. So you can look forward to cut down on energy costs at home/office without having to compromise on the heat! The radiant heating system is able to generate as much heat or maybe more at the cost of lesser energy consumption than any other general types of heating systems. No doubt why radiant floor heating systems have become so popular!

You have the option to select from a wide range of radiant heating technologies such as the Electric radiant heating system or the more popular and highly efficient energy saving Hydronic (liquid) radiant heating system that ideally suits your home/office requirements and perfectly matches your décor and lifestyle!

You can install radiant heating system directly underneath any kind of floors such as treated hardwood floors/ceramic tiled floors/carpeted floors/linoleum floors/vinyl floors and so on. However, the best and most popular are the ceramic tiled floors that radiate and conduct maximum heat,

are visually appealing and feel crisp and warm when heated.

A radiant heating system is traditionally constructed within a spread of large thermal mass such as within a slab of cement with tubes/pipes running through it in proper spacing and pattern. Then you cover this thermal mass/concrete slab with your choice of flooring materials.

The heat radiates up through the floor, being transferred to and absorbed by the different objects in the room. The heated objects in the room consequently increase the temperature of the surrounding air and you are thus enveloped in comforting and soothing warmth within the room! The warmth stays down where the people are, not up at the ceiling or lost to the outdoors every time a door or window is opened. It thus provides comfortable, and uniform heating totally eliminating cold spots and drafts.

You can also opt for direct installation of the radiant heating system without using a thermal mass of concrete. Thus you can go for modular plates/boards fitted with tubing/piping as per specifications that are placed directly beneath the floor. So you can avoid the hassle of installing a concrete slab!

Electric radiant heating is best suited for use in regions where electricity comes cheap! So if you are planning to install an electric radiant heater in your home/office make sure that you always install a thermal mass of concrete. This will help to entrap the generated heat for a prolonged duration thus saving your electricity consumption to a huge extent.

The most popular and frequently used less expensive radiant heating system utilizes water/oil to generate heat. This is the Hydronic radiant heating system that saves huge energy as well as money on heating larger areas of your home/office environment. A central boiler heats the liquid and then pumps it through the tubes/pipes within the thermal mass.

In case of Hydronic heating system it is not mandatory to install a concrete slab as thermal mass. You can install such systems in the form of modular plates/boards directly under the floors.

One thing you should keep in mind while installing carpets over the radiant heating device is that the thickness of the carpets should not be such so that heat radiation or dissipation of heat upwards is hindered. So place very thin carpets on your floors installed with radiant heating system.

You can variously install radiant heating systems in almost all rooms and spaces of your house including your bathrooms, sunrooms and kitchen.

Unlike other heating systems, radiant heating devices generate radiant heat that is capable of diminishing numerous air-borne allergens, dust, mites, pollen, etc. within the internal surroundings of your home/office. Thus radiant floor heaters by dispersing radiant heat around not only keeps you warm but also protects you and your family or colleagues from various chronic respiratory conditions predominated by asthma, allergic symptoms and so on.

And you thought that radiant heating system was meant to heat up the interiors of your home/office only! Give a second thought to home heating and cooling costs! These unique heating devices can also be installed in driveways, sidewalks, entryways, roofs and porches to facilitate easy melting of ice which otherwise needs to be painfully removed by conventional techniques of snow and ice removal.

So bid goodbye to those laborious and messy expeditions of shoveling, snow blowing or chemical melting of accumulated snow and ice! Get smart and tech savvy! Install easy to use and highly efficient, energy saving radiant heating systems either electric/hydroponic systems to melt ice and snow and make life easier for you during winter!

Related Videos

Installing the JG Speedfit Underfloor Heating Manifold
The installation of the manifold is an integral stage of a heating system. The JG Speedfit manifold kits can be used on either underfloor heating or radiator based …
ProWarm™ warm water underfloor heating kit installation – Pipe Staple method
How to install ProWarm™ warm water underfloor heating using the ProWarm™ pipe staple system.
How To Remove Air From Your Heating System
For more information or a written out step by step you can stop by http://www.thediyguy.net/2014/10/how-to-remove-air-from-your-heating-system/ . A video on …
Best DIY Home Heating : Cheap, Easy
Wendy Tremayne shows how easy it is to open and close curtains for passive solar heating. Her home heating bill has never exceeded $45 for a 1100 square …
All About Home Heating Systems
This show looks at how to heat your home! From equalizing fuel costs so you can pick the cheapest, to the types of systems, the fuels that are used, to how a gas …